This opportunity has closed

The submission deadline was February 11, 2026. This page is kept for reference purposes.

View 1 similar active opportunity →

ARG Ramp Controls Upgrade - Argentia, NL

Marine Atlantic
MERX Posted: January 29, 2026

AI Summary

Opportunity Summary

Title: ARG Ramp Controls Upgrade
Organization: Marine Atlantic Inc.
Location: North Sydney, Nova Scotia, Canada
Contact: Paul Lewis ([email protected])

Description: Marine Atlantic Inc. is inviting qualified vendors to submit tenders for the Ramp Controls Upgrade Project located at the Marine Atlantic Ferry Terminal in Argentia, Newfoundland. The project entails mobilization and demobilization, labor and equipment provision, selective demolition, installation of an owner-supplied control panel, and the installation of conduits and cables as per specified electrical drawings. Additionally, the contractor will perform point-to-point verification on control cables and assist the Owner's Representative during commissioning activities.

Key Objectives and Scope:

  • Mobilization and demobilization of labor and equipment.
  • Demolition as indicated in project drawings.
  • Installation of control panels and associated accessories.
  • Installation of conduits and cables as detailed in the electrical installation drawings.
  • Completion of point-to-point cable verification.
  • Submission and implementation of a project schedule, safety, and environmental plans.
  • Development of a project execution methodology.

Important Dates:

  • Posted: January 29, 2026
  • Site Visit: February 3, 2026, at 9:00 AM Atlantic Time
  • Proposal Due Date: February 11, 2026, by 2:00 PM Atlantic Time

Mandatory Requirements:

  • Proposals must be submitted electronically via MERX—proposals submitted via fax, email, or other means will not be considered.
  • Timely submission of proposals is crucial; late proposals will not be accepted.

Geographic Restrictions: Project located in Argentia, Newfoundland, Canada.

Key Technical Capabilities Needed:

  • Experience with electrical installations and control systems.
  • Ability to complete safety and environmental protection plans.
  • Familiarity with construction schedule preparation.

Deliverables and Performance Standards:

  • All work should comply with specified safety and environmental plans.
  • Complete verification of control cables.
  • Preparation of an approved Construction Schedule and Site-Specific Plans.

Evaluation Criteria:
While specific evaluation criteria are not delineated, Marine Atlantic reserves the right to accept tenders in whole or in part, and the lowest bid may not necessarily be accepted. Proposals will likely be evaluated based on responsiveness to the requirements and overall value offered.

Preferred Qualifications:

  • Experience with similar projects in marine environments.
  • Strong track record with safety and environmental compliance in projects.

Companies interested in this opportunity should ensure their proposals meet all mandatory requirements to be considered. The project represents a significant upgrade to the ramp controls at a crucial ferry terminal, engaging qualified vendors who can demonstrate the required experience and capabilities.

Due Date
February 11, 2026
(Overdue)
Solicitation #
317-160-026

Actions

Create a free account to analyze this opportunity, get daily notifications, and win more bids with Narwin.ai

Documents

No documents are currently available in Narwin.

Visit original source to check related documents

Description

Read full description

Marine Atlantic Inc. Invitation to Tender Ramp Controls Upgrade Marine Atlantic Inc. (MAI) invites offers from qualified Vendors for the Ramp Controls Upgrade Project. The project is located at the Marine Atlantic Ferry Terminal site in Argentia, Newfoundland. The Work generally includes, but it is not necessarily limited to, the following: Mobilization and demobilization, including all labor and equipment as specified and as required to carry out the work. Complete select demolition as indicated on the drawings. Install Owner supplied control panel (see Appendix B) and accessories as indicated. Supply and Install conduits and cable as noted in the electrical installation drawings and control panel shop drawings. Complete point to point verification on control cables. Provide assistance to Owner's Representative for commissioning activities: Preparation, submission, and implementation of an approved Construction Schedule. Preparation, submission, and implementation of an approved Site-Specific Safety Plan. Preparation, submission, and implementation of an approved Site-Specific Environmental Protection Plan. Preparation, and submission of a Project Execution Methodology Marine Atlantic reserves the right to accept tenders in whole or in part. The lowest or any tender will not necessarily be accepted. A site visit will be held on February 3, 2026, at 9:00 AM Atlantic Time at the site in Argentia, Newfoundland. The closing for receipt of tenders will be 14:00 hours Atlantic Time, February 11, 2026. Proposals must be submitted by electronic means using the MERX EBS. This will be the only method of response accepted for consideration. Proposals will not be considered if submitted by fax, email or other open forms of communication. Proposals must be received by the closing date and hour. Late Proposals will not be considered. Marine Atlantique Inc. Appel d’offres Amélioration des commandes de rampe Marine Atlantique S.C.C. (« MA ») invite les fournisseurs qualifiés à présenter des offres pour assurer l’Amélioration des commandes de rampe Projet. Le projet est situé au terminal de traversier de Marine Atlantique à Argentia, Terre-Neuve-et-Labrador. Les travaux comprennent généralement, sans s’y limiter nécessairement, les éléments suivants : La mobilisation et la démobilisation, y compris toute la main-d’œuvre et l’équipement spécifiés et nécessaires à l’exécution des travaux. Les démolitions indiquées sur les dessins. L’installation du panneau de commande fourni par le propriétaire (voir annexe B) et les accessoires comme indiqué. La fourniture et l’installation de conduits et de câbles comme indiqué dans les dessins d’installation électrique et les dessins d’atelier des panneaux de commande. Une vérification complète point par point des câbles de commande. L’assistance du représentant du propriétaire dans les activités de mise en service : Préparation, soumission et mise en œuvre d’un calendrier approuvé des travaux. Préparation, soumission et mise en œuvre d’un plan de sécurité approuvé spécifique au site. Préparation, soumission et mise en œuvre d’un plan de protection approuvé de l’environnement spécifique au site. Préparation et soumission d’une méthodologie d’exécution du projet Marine Atlantique se réserve le droit d’accepter des offres en tout ou en partie. L’offre la plus basse ne sera pas nécessairement acceptée. Une visite des lieux aura lieu le 3 février à 09:00 heure de l’Atlantique sur le site d’Argentia (Terre-Neuve). La date limite de réception des offres est fixée au 11 février à 14 h, heure de l’Atlantique. Les propositions doivent être soumises au moyen de la fonction de soumission électronique de MERX. Il s’agit de la seule méthode de réponse acceptée. Les propositions ne seront pas prises en considération si elles sont soumises par télécopie, par courriel ou par d’autres formes ouvertes de communication. Les propositions doivent être reçues avant la date et l’heure de clôture. Les propositions reçues après le délai ne seront pas prises en considération. Bidding and Documents are available on http://www.merx.com. Fees may apply; See https://www.merx.com/public/pricing for more information.

Additional Information

Source

canadabuys

Status

closed

Procurement Method

Competitive - Open bidding

Procurement Category

Construction

Reference Number

MX-443850887122

Amendment Number

001

Contracting Entity

Marine Atlantic

Contact Name

Paul Lewis

Contact Email

Contact Phone

+19027945244

Organization City

North Sydney

Organization Province / State

Nova Scotia

Organization Country

Canada

Last Updated

July 29, 2026

Frequently Asked Questions

When is the proposal submission deadline?

The proposal submission deadline is February 11, 2026 (Overdue).

Note: This opportunity has already closed. See similar active opportunities above.

Where can I submit a proposal or get solicitation documents?

You can access the full solicitation documents and submit your proposal at the official source:

Visit Official Source

Similar open opportunities 1 available

Since this opportunity has closed, here are similar active opportunities you may be interested in:

Narwin.ai is a great way to find government contracts and opportunities. Disclaimer: This bid/tender/opportunity information is presented as is and may be incorrect at times. Please read the tender documents carefully before finalizing bids. We do not accept any responsibility and cannot be held legally liable for any inaccuracies.